• Home

    PYRAMID POWER AND OTHER EFFECTS  from Jeff Johnston
     ----------------------------------------------------------------------
     some of my research was based on following experiments that other people
    have performed. The one item that got me started was an electron
    microscopic photograph of a razor blade that had been treated in a
    pyramid. There was a BEFORE and AFTER shot showing how the metal had
    re-generated itself at the crystalline level. I found this very
    interesting, because to me it seemed like pretty good verification for
    some kind of effect. I suspect that multiple frequencies are involved and
    that is why I branched out in the direction of bio-medical effects, i.e.
    brainwave activity, some form that could be tried out with different
    people under different circumstances, to see any consistancy of effects. I
    did this research and other experiments that I haven't described yet,
    about 8 or 9 years ago. This pyramid power effect is only part of what I
    have been tracking as a larger effect that works in other areas too. This
    may sound a little crazy but from what I can tell so far from my research,
    it is linked to type of "Earth Energy Effect" (I need some sort of name to
    try to describe this) that has been used in various forms throughout what
    we know as "recorded history". When I have more time available I will
    attempt to write a summary of experiments performed over the last 20
    years. This involves pyramid power and other related material.
    One of my conclusions is that SHAPE has an effect on surrounding
    matter, and that it doesn't have to be in the exact shape of a pyramid to
    have an effect. For example, I have experimented with altering the base
    angle to apex ratio and found that other shapes will work also. This led
    me into another area in the design of antennas for capturing this type of
    energy. I built a few prototype designs that were not even square and
    still got some results. Not always as good results as using a standard
    pyramid, but they did something. To answer your question: YES. The longest
    running experiment that I did in this area was a preservation experiment
    that lasted 18 months. I used a piece of raw pork. If anything is going to
    go bad, raw pork will in about 48 hours. After 18 months there was no
    evidence of it smelling or being bad. Only have 2 min. left will cont.
    another time.

      The following is a reply to answer some questions.
     In answer to the question what brainwave states did the subjects
     experience: Alpha, Beta and Theta. In most subjects alpha was
     experienced in the first 15 minutes. About half of the group
     experienced theta around the 40 to 50 minute time frame. I tried
     several lengths of time, 1 hour, 1 and 1/2 hours, 2 hours, and 3 hours.
     I experimented with a number of variables of time length, also the
     time of day the experiment was done. I was looking for some connection
     to some research done in Germany starting in the 1940's dealing with
     what had now come to be known as Cosmobiology. (Today the Russians
     take this quite seriously and continue doing research in this area.)
     Cosmobiology is still "alive" and well in Germany today, as well as
     some research being done in the United States. Cosmobiology deals  o73
     with cycles of time. It was some of the original research that spawned
     another subject, biorhythms. Now, a lot of what is being done as
     biorhythms today has kind of strayed from the original path, and the
     type of programs or information I see on the subject today has been
     diluted quite a bit and as a result a lot of the accuracy has been
     lost. So please don't judge the Parent Cosmobiology, by the Child
     Biorhythms who due to misunderstanding and lack of applied methods has
     caused some people to question it's validity. For biorhythms to work
     properly it has to be based on the exact time of the begining of the
     cycle. This means to the nearest minute. Most software programs
     available today are only in the ballpark because they are based on a
     window of time that is 24 hours wide. This is too wide for accurate
     results in my opinion. Consult the original research done in this area
     and I think you will see why. It's a question of methodology. See
     Rineholt Ebertein et al.

          In answer to the question: Am I still doing research into the
     pyramid effect? Yes I am, but not just "pyramid" research. I am in the
     slow process of writing a book that includes some of the information
     of pyramid effects but the core of the book material is on some other
     subjects that are related. These involve some of the things I stumbled
     across while doing research on the pyramid effects and other fields
     that at first I thought were entirely unrelated.

          In answer to what type of control materials to use: I would
     recommend using two items as closely matched as possible. For example,
     If you are planning on using razor blades in an experiment then be
     sure that both the control and the experimented blade are from the
     same SET or package from the same manufacturing facility. If using
     fruit or organic material, then for example, use one apple but cut the
     apple in half using one side for control and one side for the
     experiment. On the subject of controls, be sure that the area that you
     are doing the experiment in is as closely matched as possible in temp.
     humidity, light, electromagnetic fields, alignment etc., and that the
     area being observed be as secure as possible. The reason I say that is
     once upon a time I had an experiment that ran for several weeks and I
     got one result. I re-ran it and got another result. I re-ran it again
     and got another result. Well by this time I was wondering what the
     problem was, and after a lengthly investigation found out that someone
     in my household had been cleaning in the area and unknowingly
     contaminated the experiment. (Drove me crazy trying to figure it out.)
     If you are doing preservation experiments, or any other for that
     matter, be sure you do not exceed 5% of the volume of the pyramid.

         In answer to the question: Can you eat fruit preserved in a
     pyramid? Yes. I have eaten lots of things preserved this way. (This
     was done 8 or 9 years ago, I am still alive so I guess there are no
     known toxic effects.) One of my organic subjects was a carrot that at
     the begining of the experiment was about 9 inches long by 1 and 1/4
     inch around. 18 months later this carrot was about 3 inches long and
     about the size of a pencil around. I ate it. It tasted fine, had a
     good flavor and seemed to me not to have changed too much except for
     the water content.

         In answer to the question: What materials did I build the large
     meditation pyramid out of? Well, all together I built several hundred
     pyramids, out of all sorts of materials, from 1 inch to 12 feet on the
     base. The meditation pyramid that I did the brainwave experiments in
     was made of aluminum tubing 3/4 inch diameter. On the subject of
     materials, I have found that different materials have different
     effects. Some of these effects can be classified as "hardcore
     scientific" and some are purely subjective states reported by the
     person having the experience. A.K.A. "a feeling inside". If you are
     using metal materials then I recommend not to use young plants,
     because from what I can tell, the effect is too intense for them at a
     young age. If you are dealing with experimenting with purely
     biological effects then I recommend using wood or organic materials. I
     have found that in some circumstances that if you are looking for
     effects in VLV (Very Low Voltage) then the only way to go is pure
     organic materials.
     I think that covers this batch of questions. I wish you well in
     your experiments. The above reminds me of an experiment I did with the
     12 foot based aluminum tubing pyramid that I have found very
     interesting. I built an insulated copper coil of about 120 winds, and
     placed it about 18 inches down from the apex of the pyramid. I ran the
     wires down the northeast side of the pyramid aligned to magnetic north.
     I connected the wires to a device that sent electrical signals through
     it operating at 2 million cycles per second at 50,000 volts A.C. I let
     this run for several hours. I noticed afterwards that it seemed to
     magnify the effect of the pyramid, but what really got me was that
     there was a faint glow in the dark at the apex. This was related to
     the charging done before hand. What gave me part of the idea to try
     this was a picture I saw, a kirlian photograph that showed a glow
     around the apex of a pyramid.
     As far as research goes, a very good book on the subject is called
     The Great Pyramid by Christopher Bird. In it he covers the history and
     mathematics involved especially in relationship to the solar system. I
     would recommend it as one of the best researched books in this area.
     This guy spent years digging through libraries all over the world,
     using documents that are preserved in archives, listing some of the
     earliest recorded information available.